KEPCO BOP-E Series Ethernet Control DC Bipolar Power Supplies

KEPCO BOP-E Series Ethernet Control DC Bipolar Power Supplies

Share:


KEPCO BOP-E Series Ethernet Control DC Bipolar Power Supplies

Category: Power Supply

Kepco's new BOP-E Series of Ethernet-controlled 100W, 200W and 400W BOP linear bipolar power supplies deliver fast, ultra quiet and clean bipolar power. Kepco's BOP-E's models can be controlled from anywhere over Ethernet or LAN. Communication is either through a web page or by using SCPI commands via LabView and Telnet.

 

  • True 4-quadrant programmable voltage and current power supplies.
  • 14 Standard Models, ± 0-5 Volts to ± 0-200 Volts, ± 0-5 Amps to ± 0-30 Amps.
  • Dual-range, 16-bit interface provides 15 bits of resolution for both full and quarter scale of output.
  • Inductive load and capacitive load optimized versions.
  • Discovery: MDNS (Bonjour - like the printer discovery) and VXI-11 (National Instruments Ni Max, Agilent Io controller)
  • IP address support: DCHP, AUTOIP and Static IP (using Web Page)
  • Connections: SOCKET @ port 5025 and TELNET @ port 5024
  • Connection throughput: 25 milliseconds
 
For further information please refer below link
 
https://www.kepcopower.com/bop-e.htm


Contact us for more information

Mecomb Malaysia Sdn Bhd
Kompleks Kejuruteraan Tractors
No.1, Jalan Puchong
Taman Perindustrian Puchong Utama

47100 Puchong, Selangor

Tel:       +603 8068 8000
Fax:      +603 8068 8102
Mobile:  +6019 4717334 (Khairul)

Email:   csdpj@simedarby.com